Filter
Top Products
Using the PXC 360 BT
18
Switching the TalkThrough function on/off
The PXC 360 BT provide excellent attenuation of ambient noise. The Talk-
Through function allows you to communicate undisturbed with other
people without having to remove the headphones even when NoiseGard is
switched on.
To switch the TalkThrough function on:
̈ Briefly press the NoiseGard button ».
The LED ቢ lights up red. The TalkThrough function is switched on.
To switch the TalkThrough function off:
̈ Briefly press the NoiseGard button ».
The LED ቢ goes off. The TalkThrough function is switched off.
Switching the Bluetooth function on/off
Via the Bluetooth interface, the headphones can be connected to a wide
variety of Bluetooth enabled devices.
To switch the Bluetooth function on:
̈ Press the Bluetooth button ² and keep it pressed until the LED ቢ
flashes 3 times blue. The Bluetooth function is switched on.
To switch the Bluetooth function off:
̈ Press the Bluetooth button ² and keep it pressed until the LED ቢ
flashes 3 times red. You hear a descending beep.
The Bluetooth button ² goes off. The LED ቢ flashes blue and the
Bluetooth function is switched off.
Changing the volume
The PXC 360 BT allow you to change the volume of the audio signal:
If you press the respective button briefly, the volume is changed incremen-
tally; if you hold down the button, the volume is changed continuously.
When the minimum or maximum volume is reached, you hear an acknowl-
edgement tone.
ᕣ
When the TalkThrough function is switched on, you cannot listen to
music.
²
Button Duration Function Button Duration Function
Incrementally
increases the
volume
Incremen-
tally reduces
the volume
Continuously
increases the
volume
Continuously
reduces the
volume
1 s 1 s