Filter
Top Products
9
Putting the PXC 360 BT into operation
Putting the PXC 360 BT into operation
̈ Before using the PXC 360 BT for the first time, remove the protection
strip from the battery pack.
Charging the battery pack
̈ Before using the battery pack for the first time, charge it for at least
3 hours. The battery pack can also be charged inside the headphones
during operation.
When charging the battery pack, the LED ¸ on the battery pack lights up
red. When the battery pack is fully charged, the LED ¸ on the battery pack
lights up green.
When the battery pack is almost flat, the LED ቢ flashes red. You hear a
short, descending acknowledgement tone.
The operating time of the battery pack depends on the device settings, the
listening situation and the audio sources used. The operating time will be
reduced if you use SRS WOW HD.
3h
¸
1
3s
Type of use Operating time
NoiseGard and Bluetooth technology 8 hours
NoiseGard without Bluetooth technology 20 hours
Bluetooth technology without NoiseGard 10 hours
Remove the battery pack if the headphones will not be used for
extended periods of time.