Filter
Top Products
17
Using the PXC 360 BT
Using the PXC 360 BT
Adjusting the PXC 360 BT to the listening situation
The headphones have a SRS WOW HD function, a NoiseGard function,
a Bluetooth function and a TalkThrough function. Depending on the
listening situation, you can switch these functions on or off.
Switching the SRS WOW HD function on/off
SRS WOW HD ensures enhanced sound quality and bass boost perfor-
mance, thus allowing for a spectacular sound experience.
To switch the SRS WOW HD sound enhancement on:
̈ Briefly press the SRS button ¿.
The button is backlit in yellow and the SRS WOW HD function is
switched on.
To switch the SRS WOW HD sound enhancement off:
̈ Briefly press the SRS button ¿.
The yellow backlighting goes off and the SRS WOW HD function is
switched off.
Switching the NoiseGard function on/off
The NoiseGard function has to be switched on to be active. If the NoiseGard
function is switched off, the PXC 360 BT can also be used as conventional
headphones.
To switch the NoiseGard function on:
Press the NoiseGard button » for 2 seconds.
The button is backlit in red and the NoiseGard function is switched on.
To switch the NoiseGard function off:
Press the NoiseGard button » for 2 seconds.
The red backlighting goes off and the NoiseGard function is switched
off.
¿
The NoiseGard button » is backlit, indicating the current setting.
The backlighting goes off after a short while in order to conserve
energy.
̈ Press any button on the headphones to display the current
setting of the NoiseGard active noise compensation.
ᕣ
2s
Conserving energy
Switch the NoiseGard function off after use to conserve energy.