Filter
Top Products
11
Putting the PXC 360 BT into operation
Connecting the charging cable to the mains unit, to a PC or to other
USB devices
In order to charge the battery pack, you can connect the charging cable
to either the USB socket of your PC or the supplied mains unit or to other
USB devices.
To connect the charging cable to a PC:
̈ Connect the USB plug of the charging cable ¹ to the USB socket of
your PC.
The battery pack is being charged. The LED ¸ on the battery pack
lights up red.
To connect the charging cable to the mains unit:
̈ Connect the charging cable ¹ to the mains unit.
̈ Plug the suitable country adapter onto the mains unit.
̈ Plug the mains unit into a wall socket.
The battery pack is being charged. The LED ¸ on the battery pack
lights up red.
̈ After charging, unplug the mains unit from the wall socket.
If you have charged the battery pack outside the headphones:
̈ Insert the charged battery pack into the headphone’s battery pack
compartment until it locks into place.
̈ Close the cover of the battery pack compartment º.
Adjusting the headband
For optimum transmission quality, good noise attenuation and best
possible comfort, the headband has to be adjusted to properly fit your
head:
̈ Wear the headphones so that the headband ³ runs over the top of
your head.
̈ Adjust the length of the headband so that
–the ear pads ¶ rest comfortably against the ears,
– you feel even, gentle pressure around your ears,
– a snug fit of the headband ³ on the head is ensured.
̈ To ensure maximum noise attenuation, final adjustment is best made
in a noisy environment.
b
¸
EU
UK
US
AU
¹
¶
³