Filter
Top Products
Using the operating menu
24
Using the operating menu
Overview of the operating menu
Display Function of the menu
Main menu
“Tune” Sets a receiving frequency (this frequency is automatically
stored in channel “01” of the frequency bank “U” (user
bank))
“Bank.Ch” Switches between the frequency banks and between the
channels of a frequency bank
“Name” Enters a name
“Squelch” Adjusts the squelch threshold
“Booster” Switches the booster supply voltage on/off
“AF Out” Adjusts the audio output level
“Clock” Adjusts the sampling rate of the digital audio output
“Command” (EM 3732-II COM receiver only)
Configures the audio and command outputs
“More” Changes to the extended menu
Extended menu
“Scan” Scans the frequency banks for free frequencies
“Display” Selects the status display
“IP-Addr” Adjusts the IP address of the receiver
“MAC” Displays the MAC address
“Standby” Sets the receiver to standby mode
“Reset” Loads the factory-preset default settings
Tune
Bank.Ch
Name
Squelch
Booster
AF Out
Clock
Command
More
Main menu
Scan
Display
IP-Addr
MAC
Standby
Reset
Extended menu