Filter
Top Products
45
Mounting the receiver into a rack
With the two supplied rack mount “ears”, the receiver can be mounted into a 19” rack (1 U). The
rack mount “ears” are screwed to the receiver on the left and right ቢ.
Note
If you wish to connect the antennæ to the front side, you must pull the cables of the
GA 3030-AM antenna mount through the holes on the rack mount “ears” before
mouting the “ears” ቤ.
The GA 3030-AM antenna mount (accessory, see chapter 28) allows the antennæ to be connected
to the front of the receiver, for example if the rear of the rack is closed.
Mount the antenna holders to the right and left to the handles of the receiver ባ. The connection
cables, which are firmly fixed to the antenna holders, are connected to the antenna sockets on the
rear of the receiver.
Assembly instructions
ț Do not place the receiver in direct proximity to digitally controlled devices!
ț Site the receiver as high as possible so that the receiving antennæ have a
“free line of sight” to the transmitter antennæ!