Filter
Top Products
44
5 Assembly and mounting
Use as a stand-alone receiver
When using the EM 3532 as a stand-alone receiver, it is easiest to use the supplied telescopic
antennæ. They can be mounted quickly and easily to the rear of the receiver and are suitable for
all applications where – good reception conditions provided – a wireless transmission system is to
be used without a large amount of installation work. The best reception quality, however, is obtained
by using remote antennæ (see chapter 6).
To ensure that the receiver is securely mounted
on a surface on which it cannot slip, four self-
adhesive soft rubber feet are supplied. These feet
are stuck into the recesses on the lower side of
the receiver.
Ensure that the recesses are clean and free from
grease before mounting the feet.
Note
Do not use these feet if rack-mounting
the receiver.