Filter
Top Products
21
Adjusting settings via the operating menu
If you have accidentally switched off the squelch:
̈ Press the UP rocker button to switch the squelch on.
Scanning for, releasing and selecting frequency presets –
“Easy Setup”
Selecting the frequency bank and the channel – “Frequency Preset”
Display Squelch is ...
... switched on.
The dotted line ቫ displays the squelch
threshold.
... switched off.
The dotted line ቫ goes off and the audio
level display “AF” shows full deflection
(hissing noise).
Menu item Function of the menu item
Reset List Releases all locked frequency presets
Current List Selects an unused frequency preset
Scan New List Automatically scans for unused receiving frequencies
(frequency preset scan). If receiving frequencies are used,
they will be locked; if receiving frequencies are unused,
they will be released. After the frequency preset scan,
you can select an unused frequency preset.
When setting up multi-channel systems, please observe the
following:
Only the factory-preset receiving frequencies within one
frequency bank (“1” to “20”) are intermodulation-free. It is vital
to observe the notes on frequency selection on page 28.
MHz
823.925
**2000**
AFRF
P
MUTE
ቫ
MHz
823.925
**2000**
AFRF
P
ቫ
Menu
B.Ch: 1. 1
Frequency Preset
B.Ch:
863.100MHz
Frequency Preset
1. 1
B.Ch:
Frequency Preset
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
“Stored”
SET
SET
SET
6. 3
824.500MHz