Filter
Top Products
6
Inserting batteries
Install two “R6 (HP 7)” batteries.
NOTE:
- Remove the batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage.
Remote control range
DISC
MENU
SYSTEM
MENU
CH/INPUT
MUTEVOLTV
SURROUND
LEVEL
FUNCTION
TRIM TEST SOUND
RETURN
SELECT
TIMER CLEAR
Operation Status Display
Front panel display
Remote sensor
Within approx.
6 meters
30°30°
REC
D
DVD
RW
ANGLE
PBC
VPS
PDC
REM
NICAM
HQ
SP
LP
EP
EP
1
8
7
10
12 13 11 14 15 16
2 9 3 4 5 6 20 17
18
19
These symbols can light up on your DVD recorder display:
1
w
Playback in progress.
2
s
Playback/record interrupted (Pause).
3 VPS/PDC Video Programming System / Programme Delivery Control: A VPS or PDC code will be transmitted for the selected
TV program.
4 REM Displays the Title/Track time remaining
5
A recording (timer) has been programmed.
6 NICAM The DVD recorder has detected a Nicam audio signal.
7 REC Recording in progress.
8
D
Lights when playing a disc recorded with Dolby Digital Audio.
9 dts Lights when playing a disc recorded with DTS.
10 P Lights when progressive video is being output.
11 DVD+RW Displays the type of DVD disc in the recorder: DVD /DVD+R / DVD+RW.
12 ANGLE Displays the angle information of the DVD video disc.
13 PBC Play Back Control.
14 T Displays the current title number (DVD).
15 TR Displays the track selected/played (CD).
16 C Displays the chapter selected/played (DVD).
17 ST During playback a HiFi/2 channel tone was detected or a HiFi/2 channel tone was received.
18 CH Channel/programme number.
19 HQ, SP, LP, EP, EP+ Displays the recording quality selected during recording. Recording qualities HQ, SP, LP, EP or EP+ are shown
on the recorder display.
20
Multi-function display.
DVR_HT120_UK_INS_MANUAL.indd 6DVR_HT120_UK_INS_MANUAL.indd 6 6/13/2005 11:16:07 AM6/13/2005 11:16:07 AM