Filter
Top Products
27
Displaying Photos in the Slide Show
Specify the roll in the thumbnail display, and press the k button to
start the slide show.
Enlarging images
When ZOOM is pressed during the slide show or while the slide show is
paused, the currently displayed image can be enlarged up to two times
its size.
Each press of ZOOM switches the zoom ratio, and the zoom ratio is
displayed at the bottom of the screen.
You can adjust which part of the video image will be displayed in the centre
of the screen by pressing 4, 6, 8, 2 during zoom playback.
To return to regular playback, repeatedly press ZOOM until the zoom ratio
display at the bottom of the screen disappears.
Pausing the slide show
When you press PAUSE s, the slide show is paused, and the “Photo
Slide Show” menu is displayed.
To continue the slide show from the paused position, press w.
Ending the slide show
Press e to end the slide show and return to the thumbnai l screen.
Changing how slide shows are displayed
When you press PAUSE s, the slide show is paused, and the “Photo
Slide Show” menu is displayed. In this menu, set how the slide show is
to be displayed (e.g. image display time).
NOTE:
- If you do not perform any operation, the slide show menu disappears.
To redisplay the “Photo Slide Show” menu, press T/C.
Photo
Slide Show
Photo
Play
Thumbnails
Zoom
x1
Rotate
-
Timer
3
Repeat
Off
OK
OK
24
Photo:
Date:
24/55
01/01/2005
Menu Item Explanation of Operation
Photo When you press the number buttons to enter the number
of an image in the roll that is being displayed in the slide
show, that image is displayed.
You can then enlarge or rotate it.
Play
When you press the k button, the slide show is
resumed with the slide show menu displayed.
Thumbnails
When you press the k button, the screen returns to
the thumbnails screen.
Zoom
When you press the k button, the currently displayed
image is displayed enlarged. Each press of the k
button changes the zoom ratio between X1, X2, X4,
and X8.
Rotate
When you press the k button, the currently displayed
image is rotated. Each press of the k button rotates
the image 90° clockwise.
Timer Sets the time (number of seconds) that each image
is displayed by pressing the k button, 4 6 or the
number buttons up to 99(max).
Repeat Specifi es whether or not to repeat the slide show after
all of the images have been displayed. Each press of the
k button or 4 6 switches between on and off.
DVR_HT120_UK_INS_MANUAL.indd 27DVR_HT120_UK_INS_MANUAL.indd 27 6/13/2005 11:16:10 AM6/13/2005 11:16:10 AM