Filter
Top Products
19
NOTE:
- What is “VPS/PDC?”
“VPS” (Video Programming System) and “PDC” (Programme Delivery
Control) are mechanisms for controlling start of recording and the
continuation time according to signals that arrive from the TV sta-
tion. These control mechanisms allows reserved programmes to be
recorded on time even if programmes start earlier or later than the
reserved scheduled times.
The times listed in TV guides are either VPS or PDC times.
To start recording at times different from “VPS/PDC”, turn “VPS/PDC”
off.
- VPS/PDC features are enabled for individual programmes to be
recorded. To continuously record two or more programmes by “VPS/
PDC” on a certain channel, reserve each recording individually.
5. Move to the “Confi rm Programming” item using 8 or 2, and press
the k button.
SP
None
Record Mode
Repeat
VPS/PDC
Confirm Programming
Video Plus+
Enter Code
To Exit Press TIMER
123456789
6. The “Timer Setup” screen is displayed. Move to the “Confi rm program-
ming” item using 4 or 6, and press the k button.
SP
None
Record Mode
Repeat
VPS/PDC
Confirm Programming
Timer Setup
Program
Time
Start
End
To Exit Press TIMER
14 04
08 41 09 36
Date
50
::
7. The “Timer List” screen is displayed. Check the reserved details.
Timer List
To Exit Press TIMER
Press OK to Edit Entry,CLEAR to Delete
Total Recording Time: 02:00
Date
07/04 AV2 SP21:00/23:00
Ch. Mode
VPS/PDC
Start / End
Insert Recordable Disc and Press /ON to Start Recording
NOTE:
- To change the reserved details, select the line to change using 8
or 2, and press the k button. (When making the 5th reservation
onwards, the second page of the reserved details list is displayed
by repeatedly pressing 2.) The display returns to the "Timer Setup"
screen. Here, set the reserved details again.
- Select a line that has not been entered, and press the k button.
The display returns to the "Timer Setup" screen. Here, you can reserve
a different programme.
- Reservations can also be deleted. For details on operation methods,
see page 21.
8. Press TIMER to return to the “Timer” screen, and press TIMER
again to end timer recording. The timer programme recording time
is displayed on the Channel/Clock Display.
AV1
10:48
21:00
9. Load a DVD+R/RW (unprotected) ready for recording.
NOTE:
- Load a disc with enough free space for recording the programme.
10. Press o to turn the DVD recorder off.
Recording is automatically started when the timer reaches the recording
time.
NOTE:
- lights on the front panel to indicate that the DVD recorder is set
for timer recording.
- When there is not enough free space for recording the entire pro-
gramme on the disc, the programme will be recorded to free space,
and recording will end halfway through the programme.
DVR_HT120_UK_INS_MANUAL.indd 19DVR_HT120_UK_INS_MANUAL.indd 19 6/13/2005 11:16:08 AM6/13/2005 11:16:08 AM