Filter
Top Products
I Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
SettingtheDRC(DynamicRangeCompression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
• The test tone will be sent to L -* C -*
R -* SR _ SL -* SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
RETURN button to return to the previous level.
MENU buttonto exitthe setup screen.
Press TEST TONE button.
• Test tone wilI be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
• Use this function to check that each speaker is correctly
connected and that there is no problem.
• When there is no input signal from the HDMI IN function, the
Test Tone will not work.
To end the test tone,
press TEST TONE button again.
L:FrontSpeaker(L) C:CenterSpeaker SW: Subwoofer
R:Front Speaker(R) SL: RearSpeaker(L) SR:RearSpeaker (R)
Start [
TLmTTONE
Q
HHH_
HHH_
iiiiiiii
iiiiiiii
iiiiiiii
iiiiiiii
• When the Cursor • button is pressed,
the effect is greater, and when the
Cursor• buttonispressed,theeffectis
smaller.
RETURN button to return to the previous level.
_sMENU button to exit the setup screen.