Filter
Top Products
Settings (Con't)
Setting the DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
1 In Stop mode, press the MENU button.
2 Press the Cursor • button to move to <Audio> and then press the ENTER button.
3 Press the Cursor • button to move to <DRC> and then press the ENTER button.
4 Press the Cursor A • button to adjust the DRC.
• WhentheCursor • buttonispressed,the effectisgreater,andwhentheCursor • buttonis
pressed,theeffectissmatler.
_ Press the RETURN button to return to the previous level.
_" Press the EXIT button to exit the setup screen.
Setting the AV SYNC
Video may look slower than the audio if it is connected to a digital T_ If this occurs, adjust the audio delay time to to match
the video.
1 In Stop mode, press the MENU button.
2 Pressthe Cursor• buttonto moveto <Audio> and then pressthe ENTERbutton.
3 Press the Cursor • button to move to <AV-SYNC>and then press
the ENTER button.
4 Press the Cursor A, • button to select theAV-SYNC Delay Time and then
press the ENTER button.
• Youcansettheaudiodelay timebetween0 msand300ms.Setittotheoptimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Setting the HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF
1 In Stop mode, press the MENU button.
2 Pressthe Cursor• buttonto moveto <Audio> and then pressthe ENTERbutton.
3 Press the Cursor • button to move to <HDMI AUDIO> and then press
the ENTER button.
4 Press the Cursor •, • button to select <ON> or <OFF> and then press
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the hometheater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMt AUDIO is automatically down-mixed to 2ch for TV speakers.
• tf you turn the unitoff and on, or switch functions when the HDMIAUDIO isset to ON,
the HDMI AUDIO will revert to the OFF default setting.
Press the RETURN button to return to the previous level.
_- Press the EXIT button to exit the setup screen.
48 49