57
ENG
● SYSTEM UPGRADE
System upgrade
Samsung may offer upgrades to your Blu-ray Home Theater's fi rmware in the future. To upgrade this fi rmware you must :
Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest fi rmware.
You can use a CD-R or a USB fl ash drive to perform the fi rmware upgrade. For more information, see “Upgrade
Manual” at the website mentioned above.
or
Connect the network (see pages 30~31) and follow the steps below.
FIRMWARE UPGRADE
With the unit in Stop mode/No Disc mode, press the
MENU button.
Press the
▲▼◄►
buttons to select Setup, then press
the ENTER or
►
button.
Press the
▲▼
buttons to select System, then press the
ENTER or
►
button.
Press the
▲▼
buttons to select System Update, then
press the ENTER or
►
button.
The player will check the cable or network connection
status automatically. The connection checking window will
be displayed.
If the upgrade is possible : You will see information on the
current and new versions of fi rmware in a message box.
If the upgrade is not possible : You will see the following
description in the message box.
If the cable is not connected :
“Ethernet cable is not connected. Please, check the
Ethernet cable”
If the network connection has failed :
“This system can not connect to internet for update.
Please, check the network setup”
If no latest version is released (the latest version has
been already installed) :
"The latest version of the fi rmware is already installed.
There is no need to update."
If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the
unit to perform the update.
If the server service is not available :
“ Update Server is under maintenance. Please try again
later.”
1.
2.
1.
2.
3.
4.
5.
•
•
•
•
•
System
◄
Language
Audio
Display
HDMI
Network
Parental
Clock Set
Power On/Off sound : On
BD Data Menagement
System Update
►
DVDDVD
Music
Photo
Setup
System
◄
Language
Audio
Display
HDMI
Network
Parental
DVDDVD
Music
Photo
Setup
◄
System
◄
Language
Audio
Display
HDMI
Network
Parental
Clock Set
Power On/Off sound : On
BD Data Menagement
System Update
►
DVDDVD
Music
Photo
Setup
System Update
Now, Checking.
Please wait...
1 234
System
◄
Language
Audio
Display
HDMI
Network
Parental
Clock Set
Power On/Off sound : On
BD Data Menagement
System Update
►
DVDDVD
Music
Photo
Setup
System Update
The new update data was found.
Current Version : XXXXX
New Version : XXXXX
1 234
CancelStart
System
◄
Language
Audio
Display
HDMI
Network
Parental
Clock Set
Power On/Off sound : On
BD Data Menagement
System Update
►
DVDDVD
Music
Photo
Setup
System Update
This system can not connect
to internet for update.
Please, check the network setup.
OK
1 2 3 4
HT-BD1250A_XAC_0804-3.indd 57HT-BD1250A_XAC_0804-3.indd 57 2009-08-05 4:22:202009-08-05 4:22:20