Filter
Top Products
43
ENG
● DISPLAY SETUP
Movie Frame (24 Fs)
Movies are usually fi lmed at 24 frames per second. Some
Blu-ray Discs have the capability of playing back at this frame
rate. Setting the Movie Frame (24Fs) feature to ON allows you
to adjust the Blu-ray Home Theater's HDMI output to 24
frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of frame rates may be
included: Movie material (24 frame) and Video material (30
frame). When the setting switches between Movie (24 frame) and Video (30 frame),
the screen may blink for a few seconds.
Resolution
Sets the output resolution of the HDMI and Component video signal.
The number in 480i, 480p, 720p, 1080p and 1080i
indicates the number of lines of video. The i and p indicate
interlace and progressive scan, respectively.
- BD Wise : Automatically sets the optimal resolution when
connected via HDMI to a TV with the BD Wise
feature.(The BD Wise menu item appears only if
BD Wise is set to On.)
- 1080p :
Outputs 1080 lines of progressive video (HDMI only).
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines of progressive video.
- 480i :
Outputs 480 lines of interlaced video (Component only).
If the connected TV does not support Movie Frame or the
selected resolution, you will see the following message:
If you select Yes and the resolution is not supported, the TV's
screen will be blank. Please wait for 15 seconds and
the resolution will revert to the previous value automatically.
If the screen is blank, press and hold the
STOP ()
button on the front of the player for
more than 5 seconds (no disc inserted). All settings are restored to the factory default.
Follow the steps on the previous page to access each mode and select the Display Setup
that your TV will support.
When the factory default settings are restored, all the user data stored in the BD data will
be deleted.
•
M
TV Aspect : 16:9 Normal
Movie Frame (24 Fs) : Off
►
Resolution : 1080p
Progressive Mode : Auto
Still Mode : Auto
Screen Message : On
System
Language
Audio
Display
◄
HDMI
Network
Parental
DVDDVD
On
Off
Music
Photo
Setup
TV Aspect : 16:9 Normal
Movie Frame (24 Fs) : Off
Resolution : 1080p
Progressive Mode : Auto
Still Mode : Auto
Screen Message : On
System
Language
Audio
Display
◄
HDMI
Network
Parental
DVDDVD
1080p
1080i
720p
480p
480i
Music
Photo
Setup
Music
Photo
Setup
TV Aspect : 16:9 Normal
Movie Frame (24 Fs) : Off
Resolution : 1080p
►
Progressive Mode : Auto
Still Mode : Auto
Screen Message : On
System
Language
Audio
Display
◄
HDMI
Network
Parental
DVDDVD
If no pictures are shown after the selection,
please wait for 15 seconds. And then,
the resolution will be reverted
to the previous value automatically.
Would you like to make a selection?
Yes No
HT-BD1250A_XAC_0804-2.indd 43HT-BD1250A_XAC_0804-2.indd 43 2009-08-05 4:16:512009-08-05 4:16:51