Samsung 20051111115925328 Home Theater System User Manual


 
82
Check to see if the TV power is on.
Check to see if the video cables are connected properly.
Check for damage, deformities or dirt on the disc
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Be sure that the remote control is being used within the required
angle and distance
Replace the batteries.
Select the correct mode(TV/DVD) function of the remote.
The remote control does not
work.
Only DVDs that are created with audio language and subtitles can
use this feature.
Audio language and
subtitles do not work.
The disc may not have been created with menus.
Menu screen does not appear even
when the menu function is selected.
While the player is in the stop mode, hold the main unit's button for
longer than 5 seconds. “INITIALIZE” appears on the display and all
settings will return to the default values.
Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Turn off the power and hold the button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
The password for rating
level has been forgotten.
The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
Check the antenna connections.
If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
Can't receive radio
broadcast.
Symptom Check/Remedy
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
Aspect ratio cannot be
changed.
MISCELLANEOUS
45P~88P(DS665T)-SECAGB 9/22/04 5:28 PM Page 83