Filter
Top Products
22
CONNECTIONS
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Analog signal components such as a VCR or TV.
Press AUX on the remote control to select ‘DIGITAL IN / AUX1 / AUX 2’.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting External Components
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
1
3
DIGITAL OUT
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Connecting an External Digital
/ Analog
Component
Optical Cable
(not included)
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
•
If you have connected an external digital component and an Analog component to Video In (1, 2) at the
same time, there will be video from AUX 1 even when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to 1, connect Video In to 1. If you have connected Audio In (L, R)
to 2, connect Video In to 2.
•
When you select Aux 1 or 2, you are selecting Video 1 or 2 inputs respectively.
Note
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 25