Filter
Top Products
RRSS (Rear Reflecting Surround System) Setting
Select the RRSS mode for sound similar to 5.1 channel sound when rear speakers are used in the
front as reflectors.
•
Each time you press this button,
RRSS and SDSM will be repetitively
selected on the display.
•
To release, press the ASC button
again to select REAR REFLECTING
OFF.
1
Press the MODE
(RRSS/SDSM) button
of the main unit to
select RRSS.
In this setup, the rear speakers reflect sound first against the side walls
(or ceiling) and then against the rear wall.
•
Since you don’t have to separately install the rear speakers, it not only
enhances space efficiency, but also eliminates the need to arrange additional
speaker wires.
•
You can install the speakers on stands or a wall. Make sure to angle the rear
speakers so that sound is reflected against the side walls.
(The Rear speakers can turned to the right and left.)
RRSS (Rear Reflecting Surround System) Speaker Configuration
2
Press the ASC
button to select
REAR
REFLECTING ON.
69
45P~88P(DS665T)-SECAGB 9/22/04 5:28 PM Page 70