Filter
Top Products
22
Bank Name
A custom name can be assigned to each of the
six banks of both Tuner 1 and Tuner 2.
1. Enter the Setup Menu by pressing and holding
the TNR SEL button.
2. Press MEM Up/Down until BANK NAME
appears on the tuner.
3. Press BAND.
4. Press the Tune Up/Down buttons to select the
Tuner #.
5. Press BAND to advance.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press BAND. BANK NAME appears again.
8. Press BAND to access the Bank Name entry
screen.
9. Press Tune Up/Down to select a character
and MEM Up/Down to change a character posi-
tion. Up to 12 characters can be entered one by
one. A blinking LED block indicates the place-
ment of the character being entered.
10. Press BAND when bank name is entered.
11. SAVE CHANGES will appear.
12. Press Tune Up/Down to select Yes or No.
13. Press BAND to save bank name. The Bank
Name menu returns to the Tuner # prompt to
name other banks, or press TNR SEL to exit the
Bank Name menu.
Press and Hold
TNR SEL button
TUNER #
BANK #
BANK
NAME
SAVE
CHANGES?
Bank Name Procedure
TNR
SEL
Selects
character
Selects
character
position
Repeat
for each
character
in name
TNR
SEL
TNR
SEL
MEM
NAME
Procedure
BANK
NAME
Procedure
SOURCE
NUM
Procedure
Setup
Menu
REGION
Procedure
FACTORY
INIT
Procedure
UPDATE
FIRMW
Procedure
SYSTEM
INFO
Procedure
ST2 TUNER PROGRAMMING
ST2 TUNER SETUP MENU