Filter
Top Products
RKP-4 Top Panel
On/Off & Volume Control: Turns the beltpack power on and
controls headset volume.
Intercom Buttons: Assignable for several types of operation,
including talk only, listen only, talk with auto-listen, and all-
call (where activating the key also activates all keys to the left
of that key). Keys feature momentary or latching operation.
For momentary operation, the operator presses and holds a
key while communicating, then releases it when finished. For
latching operation, the operator taps a key to turn it on, then
taps it again to turn it off. Latching can be disabled via soft-
ware options in the base station or from AZedit. Two bi-color
(red and green) LED indicators for each key provide indica-
tions for talk on/off, listen on/off, incoming call, busy (for
keys assigned to talk to IFB’s), and in-use (for keys assigned
to talk to either IFB’s or ISO’s).
Copy and Scroll keys: Used for key and setup page assign-
ment. Can also be used to talk to any location in the intercom
system when no intercom key is assigned. (Note: There are 4
setup pages. Each contains a complete set of key assign-
ments.)
Call Waiting Display: 4-character, alphanumeric display for
incoming caller names.
Relay push button: A momentary or latching (set via belt-
pack software) push button for activating the relay contact
closure on the rear of the base station.
BAT/O.M. Light
7-4
Figure 7-4
RKP-4 Controls