Filter
Top Products
Headset Connection
The headset connector is a XLR type connector. Four or five
pin headset connectors may be installed in the unit. See the
“RKP-4 Controls and Connections” section for information
on the pinouts. A dynamic or electret headset microphone is
automatically detected by the beltpack and a bias voltage sup-
plied if needed.
Sidetone
Sidetone is the amount of the users voice that is feedback to
their headphone. The sidetone level in the beltpack is set at
the base station. Please see “RKP-4B Operation” section for
how to set this level.
Antenna Connection
The beltpack comes with two detachable, screw type, 1/4
wave antennas. Attach the two antennas by screwing the
antennas into the receptacles at the bottom of the beltpack.
The color dot on the screw end of the antenna must match the
color dot on the antenna receptacle.
7-3
Figure 7-3
RKP-4 Controls