Filter
Top Products
9
Playing Discs
Play Buttons and
Press the Play Button to play the disc indicated
in the Disc Display. The disc will begin play-
ing with Track 1, unless another track has been
selected before the Play button is pressed.
Unless one of the Repeat Play functions has
been selected:
• After the last track on discs 1 through 4 is
played, the next disc is selected and play
continues with track 1 of the disc.
• At the end of disc 5 disc play stops.
See the Repeat Play section for more infor-
mation.
Pause Button
Press the Pause Button to temporarily stop
playing the disc. Press the Pause Button again,
or the Play Button, to resume playing the disc
at the same track and time.
Stop Button
Press the Stop Button to stop playing the disc.
The disc will remain selected but the track
selection will go back to track 1.
Track Skip Buttons
When a disc is not playing:
• Press the button to select the next track
on the disc. Press and hold the
but-
ton to advance more than one track on the
disc.
• Press the
button to select the previous
track on the disc. Press and hold the
button to go back more than one track on
the disc.
When a disc is playing:
• Press the
button to skip the rest of track
being played and begin playing at the
beginning of the next track on the disc. Press
and hold the
button to advance more
than one track on the disc.
•Press the
button to return to the be-
ginning of the track being played. Press
and hold the
button to go back more
than one track on the disc.
Track Selection Buttons
(remote only)
To select a specific track on a disc, press the
corresponding Track Selection buttons. The
selected track immediately begins playing. To
select tracks higher than number 10 use the
“>10” button. For example, to select track 17,
press the “>10” button then the “7” button.
NOTE: When the RCC-1055 is in Pro-
grammed Play mode, the Track Selection
buttons are used to select tracks to be
added to the program. See the Pro-
grammed Disc Play section.
Search Buttons
(remote only)
Press and hold the or buttons to quickly
search a disc in the forward or reverse direc-
tion. For the first five seconds the search speed
will be approximately four times normal play-
ing speed. After three seconds the search speed
will increase to approximately 20 times nor-
mal playing speed. The sound volume is re-
duced while the search function is being used.
The search function may be used when disc
play has been temporarily stopped with the
Pause function, however no sound is heard.
The Search function will not go past the be-
ginning or end of the selected disc.
About HDCD
®
HDCD discs are encoded with a high density
data stream. During playback this high den-
sity data stream is decoded to a conventional
digital signal. This HDCD encode/decode sys-
tem greatly reduces the errors that are nor-
mally generated during the analog-to-digital,
and then digital-to-analog, conversions. The
HDCD system is automatically activated, and
the HDCD Indicator
lights, whenever an
HDCD disc is played.
Display Panel
The Disc Indicators shows the positions in
the Disc Tray that have discs in them.
The Play Indicator
is lit whenever a disc
is playing.
The Pause Indicator
is lit when disc play
has been temporarily stopped with the Pause
button.
The Disc Selection Indicator
typically shows
the number of the disc currently selected. If
the Remaining Disc Playing Time display op-
tion has been selected the Disc Selection In-
dicator changes to a “–”. See the Time Dis-
play section.
The Track Indicator
shows either the track
that is selected, the total number of tracks on
the disc, or the number of tracks that remain
on the disc. See the Time Button section.
One of the Repeat Play Mode Indicators
will light if one of the repeat play options has
been selected. See the Repeat Play Button
section for more information.
The Random Play Indicator
is lit when one
of the random play options is being used. See
the Random Play section.
The Program Play Indicator
lights when-
ever the track programming function is acti-
vated. See the Programed Play Section.
The Intro Scan Indicator
is lit when the Intro
Scan feature is activated. See the Intro Scan
section.
The Remaining Time Indicator
lights when
one of the alternative time display functions
is activated. See the Time Display Section.
The Time Display
shows either the total
playing time of the disc that is selected, the
amount of time the current track has been play-
ing, the remaining playing time of the current
track, or the remaining time of the disc that
is playing. See the Time Button section.
English