Filter
Top Products
11
Random Play Button
(remote only)
The Random Play feature randomly selects
tracks to be played. Press the Random but-
ton to turn the feature on. Press it again to turn
Random Play off. When the Random Play is
active the Random Indicator
in the display
is illuminated.
If Random Play is turned on when a disc is
not playing, a track is randomly selected when
the play button is pushed. If a disc is playing
when Random Play is turned on, another track
is randomly selected immediately and begins
playing.
The Random Play feature can be set to select
only tracks from a single disc. While a disc is
not playing, press the Random Play button
,
then select the number of the disc to select tracks
from with the disc select buttons
. When
you press the play button tracks are randomly
selected from the selected disc.
If the Track Skip Forward button
is pressed
when a disc is playing and Random Play is
turned on, another track is immediately ran-
domly selected. If the Track Skip Back button
is pressed when a disc is playing and
Random Play is turned on, the same track
begins playing from the beginning.
The Search Forward button
functions nor-
mally when Random Play is turned on. If you
search forward to the end of a track another
track is randomly selected. The Search Reverse
button
will allow you to search back to
the beginning of the track that is playing.
Random Play can be used in conjunction with
Programmed Play. If Random Play is turned
on after a set of tracks has been programmed,
the programmed tracks are played in random
order.
NOTE: In order to use these two together
the Random Play must be turned on after
tracks have been programmed. If Random
Play is turned on the Programmed Play fea-
ture cannot be selected.
If the Repeat 1 Track or Repeat 1 Disc feature
is on, it is deactivated when Random Play is
turned on. The Random Play and Repeat All
Discs features may be used together.
Intro Scan Button
(remote only)
The Intro Scan feature lets you listen to a short
section of the beginning of musical tracks. Press
the Scan button to turn on the Intro Scan fea-
ture. Press the Scan button again, or the Stop
button, to turn Intro Scan off. When the Intro
Scan feature is active the Intro indicator
in the display is lit.
If Programmed Play is not being used, the first
10 seconds of each track on each loaded disc
is played in sequence, beginning with the
currently selected track. After the first 10 sec-
onds of the last track on disc 5 is played, Intro
Scan playing stops. If Programmed Play is
being used, the first 10 seconds of each pro-
grammed track is played, beginning with the
currently selected programmed track. After the
first 10 seconds of the last programmed track
is played, Intro Scan playing stops.
If Intro Scan is turned on when a disc is not
playing, scanning begins with the track that
is selected. If a disc is playing when Intro Scan
is turned on, the RCC-1055 skips to the next
track, plays the first 10 seconds of that track,
and each of the following tracks. There is one
exception - if Intro Scan is turned while the
first 10 seconds of a track is playing. In that
instance the remainder of the first 10 seconds
of that track is played. The RCC-1055 then
skips to the beginning of the next track and
continues scanning.
The Intro Scan feature is interactive with Ran-
dom Play, Programmed Play and Repeat Play.
Such combined functions will rarely be used.
For example, if both Intro Scan and Repeat
Play/All are turned on, the first ten seconds
of each disc is played continually in sequence.
If both Intro Scan and Random Play are turned
on, the first ten seconds of randomly selected
tracks are played. If Intro Scan and Pro-
grammed Play are active, the first ten seconds
of each programmed track are played in se-
quence. If Repeat Playing/All is also active
the first ten seconds of each programmed track
are played in sequence continually. Other com-
binations of functions are possible, but again
are unlikely to be used.
Programmed Disc Play
Up to 32 tracks, on any of the loaded discs,
can be in selected for playback. After a group
of tracks have been programmed, they are
played back in the programmed order. All
programming and programmed play functions
are done with the remote control.
Program Button
(remote only)
The Program Button is used to turn the Pro-
grammed Play feature on and off. When Pro-
grammed Play is turned on the Program Play
Indicator
in the display is lit.
Once a group of tracks have been pro-
grammed, only those tracks may be played
until the Programmed Play feature is turned
off. Press the Program Button to turn off Pro-
grammed Play, clear the programmed tracks
and return to normal play mode. Programmed
tracks are also cleared when the Disc Tray is
opened and when the power is turned off.
Track Programming
Programming While a Disc is Playing
Press the Program Play button , the Pro-
gram Indicator
in the display lights. The
track that is playing when the Program But-
ton is pressed becomes the first programmed
selection. The Time display
briefly displays
“P-01” indicating the track is now programmed
selection 1. If the second track you want to
add to the program list is on the same disc,
use the Track Selection buttons
to select
the next track. If the second track you want
to add to the program list is on a different disc,
use the Disc Selection buttons
to select the
next disc. The Track and Time displays change
to indicate another selection is being made.
The Time display
briefly displays “P-02”
indicating the track is now programmed se-
lection 2. Continue selecting new discs (if nec-
essary) and tracks until you have programmed
all the tracks you want. Then press the Play
button to begin playing the programmed tracks.
English