Filter
Top Products
10
Track Calendar Display shows the total
number of tracks on the disc that is playing
and the track that is currently playing. If the
selected disc has more than 16 tracks the
Additional Track Indicator
is lit.
When a disc is selected, the Track Calendar
Display shows the total number of tracks on
the disc. The number of the track that is play-
ing flashes. After a track is played the num-
ber for that track is turned off. If there are more
than 16 tracks on the disc after track 16 is
played the
indicator flashes. The Track In-
dicator shows the number of the track being
played, or the number of tracks remaining,
depending on the Time Display mode selected.
When programmed tracks are played, only
the number(s) of the programmed track(s) are
illuminated. The number of the track that is
playing flashes, and is turned off after the track
is played. See the Programmed Play section.
Time Display Button
(remote only)
When a disc is selected, but not playing, the
Time Display shows the total playing time of
the disc and the number of tracks on the disc.
When a disc is playing, the Time Display shows
the track number and the amount of time the
track has been playing. Press the Time Dis-
play button to change the Time/Track Display
mode.
Each/Remain Mode
Press the Time button once to select the Each/
Remain mode. The Remaining Time Indicator
lights. The Track Indicator shows the track being
played. The Time Display shows the amount
of time remaining on the track that is play-
ing.
Total/Remain Mode
Press the Time button again to select the To-
tal/Remain mode. The Remaining Time Indi-
cator remains lit. The Track Indicator shows
the number of tracks remaining to be played.
The Disc Display changes from the number of
the disc that is playing to a “–”. The Time Dis-
play shows the amount of time remaining on
the disc.
Pressing the Time button when the Total/Re-
main mode is selected changes the Time/Track
Display back to the Normal Display mode. The
Time/Track Display also reverts to the normal
display mode when disc play is stopped and
started again.
Repeat Play Button
(remote only)
Normally discs 1 through 5 play in sequence
and play stops at the end of disc 5. Press the
Repeat Play button to select the Repeat 1 Track
mode. Press it again to select the Repeat 1 Disc
mode. Press it again to select the Repeat All
Disc mode. Press it once more to return to
normal disc play mode. Repeat Play functions
may be turned on or off at any time, even when
a disc is playing.
Repeat 1 Track
When the Repeat 1 Track function is selected
the “Repeat” and “1” indicators in the display
light. If the Repeat 1 Track option is selected
when a disc is not playing, the track that is
selected when the play button is pressed is re-
peated. If the Repeat 1 Track option is selected
while a track is playing, that track continues
to play and is then repeated.
The Track Skip buttons function normally when
the Repeat 1 Track option is selected. If a new
track is selected with the Track Skip buttons,
it is repeated until the Repeat Playing option
is turned off. The Search buttons function
normally when the Repeat 1 Track option is
selected. You can search forward to the next
track, and backward to the previous track. The
new track is then repeated.
If the Programed Play feature is being used the
Repeat 1 Track feature cannot be selected.
Repeat 1 Disc
When the Repeat 1 Disc function is selected
the “Repeat”, “1” and “Disc” indicators in the
display light. If the Repeat 1 Disc option is se-
lected when a disc is not playing, the disc that
is selected when the play button is pressed
begins playing track 1. After the last track on
the disc, play continues, starting with track 1
of the disc. If the Repeat 1 Disc option is se-
lected while a track is playing, that track con-
tinues to play. After the last track on the disc,
play continues, starting with track 1 of the disc.
The Track Skip buttons function normally when
the Repeat 1 Track option is selected. If a new
track is selected with the Track Skip buttons,
it is repeated until the Repeat Playing option
is turned off. The Search buttons function
normally when the Repeat 1 Track option is
selected. You can search forward to the next
track, and backward to the previous track. The
new track is then repeated.
If the Programed Play feature is being used
the Repeat 1 Track feature cannot be selected.
Repeat All Discs
When the Repeat All Discs option is selected
the “Repeat All Disc” indicators in the display
are lit. All the tracks on all the discs are played
in sequence, beginning with the track that is
selected or playing. After the last track on disc
5 is played, track 1 of disc 1 is played. All
the discs continue to play in sequence until the
Repeat All Discs function is turned off.
The Disc Skip and Disc Search feature work
normally when the Repeat All Discs function
is turned on.
If the Programmed Play feature is being used,
the programmed tracks are played in se-
quence. When the last programmed track is
played, play continues with the first pro-
grammed track. See the Programmed Play sec-
tion for more information.
The Track Skip and Search functions work
normally when the Repeat All Discs feature
is being used.
RCC-1055 CD Multi-Disc Changer