Filter
Top Products
5.3X SPECIFICATIONS
– 37 –
Dynamic Power Rating (IHF 202 Standard)
Measured at 14.4 Voltage
Per channel into a 4Ω Load 40 Watts x 4
Per channel into a 2Ω Load 65 Watts x 4
Bridged Mono into a 4Ω Load 130 Watts x 2 130 Watts x 1
Continuous Power Rating (Competition Standard)
Measured at 14.4 Battery Voltage
RMS continuous power per channel, 30 Watts x 4
all channels driven into a 4Ω load from
20 to 20,000 Hz, with less than 0.30%
Total Harmonic Distortion (THD)
RMS continuous power per channel, 55 Watts x 4
all channels driven into a 2Ω load from
20 to 20,000 Hz, with less than 0.50%
Total Harmonic Distortion (THD)
RMS continuous power bridged/mono 110 Watts x 2 110 Watts x 1
into a 4Ω load from 20 to 20,000 Hz
with less than 0.50% Total Harmonic Distortion (THD)
Signal-to-Noise Ratio >100dB (A-weighted)
Bandwidth 10 Hz to 250kHz ± 3dB
Damping Factor @ 4Ω >200
Frequency Response 20 Hz to 20 kHz ± 0.5dB
Slew Rate 30Vµs
IM Distortion (IHF) <0.05%
Input Impedance 20,000 ohms
Input Voltage Variable from 325mV to 5.5volts
(Low level in-RCA)
Variable from 850mV to 15 volts
(High level in-BTL)
Variable from 425mV to 7.5 volts
(High level in – Single Ended)
Front/Rear Sub
Channels Channel