Filter
Top Products
– 15 –
XCARD ACCESS
The internal XCard crossover(s) are accessible by removing the top
cover from the amplifier. The XCard should be inserted with the filter
side (HP, LP or FULL RANGE) facing the metal contacts inside the
socket.
• Remove six Allen Screws from cover with supplied Allen wrench (3/32")
• Insert XCard into socket with HP, LP, or FULL RANGE facing metal
contacts.
CAUTION!
Do Not Adjust
Bias
Bias
CAUTION!
Do Not Adjust
Bias
Bias
CAUTION!
Do Not Adjust
Bias
Bias
Rear XCard
Front XCard
Subwoofer XCard
Low-Pass Full RangeHigh-Pass
FULL
↕
HP
➝
➝
LP
HP
➝
➝
LP
FACTORY DEFAULTS
Rear XCard = Full Range
Front XCard = Full Range
Subwoofer XCard = 80Hz LP