Roberts Radio MP-23 Stereo System User Manual


 
Setting the clock
Leave the unit in Standby while the clock sets. In the event that the
clock does not automatically set follow the procedure below.
You will need to set the clock before the alarm function can be set.The
clock display will be 24hr format.
1. Press and hold the
Clock/Adjust button, the hour digits on the
display will ash.
2. Press the
Tuning Up or Down buttons until the desired hour digit
is set.
3. Press and release the
Clock/Adjust button, the minute digits on
the display will ash.
4. Press the
Tuning Up or Down buttons until the desired minute
digit is set. If the button is held down the digits will change more
quickly.
5. Press the
Clock/Adjust button to conrm the clock setting.
1
2,4
2,4
3,5
7