Filter
Top Products
Dynamic Range Control (DRC) settings - DAB only
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB waveband.
1. Press the
On/Off button to switch on your radio.
2. Press and release the
Setup button until "Station order" appears on
the display.
3. Press and release the
Tuning Up and Down buttons until the display
shows "DRC value".
4. Press and release the
Ok/Select button to enter adjustment mode.
5. Press and release the
Tuning Up or Down buttons to select required
DRC setting (default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. Press and release the
Ok/Select button to conrm the setting. The
display will return to radio mode.
1
2,4
3,53,5
4,6
19