System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Ensure that your radio is in DAB mode.
2. Press and hold in the
Setup button until the display shows "Press
SELECT to conrm reset...".
3. Press in and release the
Ok/Select button to select System
reset.
4. If DAB was used last then a "Quick scan" of the DAB band will be
performed, otherwise a "Quick scan" will be carried out the next time
the DAB band is selected.
After a system reset, any DAB preset settings will have been
cancelled.
If a problem persists our technical staff would be pleased to help offer
any assistance on operating the radio. Our technical helpline number
is 020 8758 0338.
1
3
45