If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Operating your radio - Search tuning FM
1. Fully extend the telescopic aerial.
2. Press the
On/Off button to switch on your radio.
3. Press and release the
Radio button until the FM band is selected.
4. Press and hold the
Tuning Up button, your radio will scan in an
upwards direction (low frequency to high frequency) and stop auto-
matically when it nds a station of sufcient strength.
5. After a few seconds the display will update. If the FM band is selected
the display will show the station name if available.
6. To nd other stations press and hold the
Tuning Up button as be-
fore.
7. To scan the FM band in a downwards direction (high frequency to
low frequency) press and hold down the Tuning Down button for
0.5 seconds and then release.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the
Volume and 3D Sound switch to the required
settings.
10. To switch off your radio press the
On/Off button.
2
3
4,6
10
2
9
9
9
7
20