Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
42
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Ensure that your radio is in DAB mode.
2. Press and hold in the Setup button [Press and hold the Select button
on the front panel] the display will show "Station order".
3. Press the Tuning Up or Down buttons until the display shows "Se-
lect factory reset". Press in and release the OK/Select button [Select
button on front panel].
4. Press in and release the OK/Select button [Select button on front
panel] to select System reset.
5. If DAB was used last then a "Quick scan" of the DAB band will be
performed, otherwise a "Quick scan" will be carried out the next time
the DAB band is selected.
After a system reset, any DAB preset settings will have been
cancelled.
If a problem persists our technical staff would be pleased to help offer
any assistance on operating the radio. Our technical helpline number
is 020 8758 0338.
1
3