Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
22
Display modes - FM RDS
Your system has four display modes in FM. The Radio Data System (RDS)
is a system in which inaudible digital information in addition to the normal
FM radio programme is transmitted.
On FM the bottom line of the display can be set to any of the following
modes.
1. Press the OK/Select button [Info button on the front panel] to cycle
through the various modes.
a. Station Name Displays the station name currently being
transmitted
b. Programme Type Displays type of station being listened to
e.g. Pop, Classic, News, etc.
c. Radio Text Displays radio text messages such as
news items etc.
d. Frequency Displays frequency of the station being
listened to.
Note: When tuned to the FM band, information display is only available
when the radio is able to receive RDS information from the broadcaster.
a
b
c
d
1
FM Stereo/Mono
1. If a station is being received with a weak signal some hiss may be
audible. To reduce the hiss press and release the [Select button on
front panel] until the display shows "Mono". Your radio will switch to
mono mode.
2. To return to stereo mode press and hold in the [Select button on front
panel] until the display shows "Auto". Your radio will switch to stereo
mode.
1,2