Filter
Top Products
15
Finding new stations - DAB
As time passes new stations may become available. To fi nd new stations
proceed as follows:-
1. Press and release the Auto-tune button, the display will show "Scan-
ning". Your radio will perform a scan of the UK DAB frequencies. As
new stations are found the station counter on the right-hand side of
the display will increase and stations will be added to the list.
2. To carry out a full scan of the entire DAB Band III frequencies press
and hold down the Auto-tune button for more than 2 seconds and
then release. The display will show "Scanning". As new stations are
found the station counter on the right-hand side of the display will
increase and stations will be added to the list.
1
2
Signal strength display - DAB
The different DAB information displays include a signal strength indica-
tor. This display can also be accessed directly without changing the DAB
information type.
1. Press and release the OK/Select button [Select button on front panel]
the lower line of the display shows signal strength. Position your radio
and angle the telescopic aerial for best reception using the signal
strength display as a guide. Move your system around and position
so as to give maximum number of black rectangles on signal strength
display.
2. The clear unfi lled rectangle indicates minimum signal level required for
satisfactory reception. Press and release the OK/Select button [Select
button on front panel] to return to normal tuning mode. In some cases
an external aerial may be desirable for optimal DAB reception.
1,2