Filter
Top Products
Please note: The instructions for the MP-16 are described fi rstly using the
remote control (highlighted in bold) and secondly using the front panel
[highligthed with brackets].
Setting the clock
Leave the unit in Standby while the clock sets. In the event that the
clock does not automatically set follow the procedure below.
You will need to set the clock before the alarm function can be set.The
clock display will be 24hr format.
1. Press and hold the Clock adjust button [Press and release the Se-
lect button on front panel], the hour digits on the display will fl ash.
2. Press the Tuning Up or Down buttons until the desired hour digit
is set.
3. Press and release the Clock adjust button [Press and release the
Select button on front panel], the minute digits on the display will
fl ash.
4. Press the Tuning Up or Down buttons until the desired minute
digit is set. If the button is held down the digits will change more
quickly.
5. Press the Clock adjust button [Press and release the Select but-
ton on front panel] to confi rm the clock setting.
1
2,4
2,4
3,5
9