Filter
Top Products
31
Selecting a track
1. While the CD is playing, press either the Fastforward or Rewind
buttons to change to the desired track, the track number appears in
the display.
2. You can also skip tracks when the player is in stop mode. Skip to the
desired track using the Fastforward or Rewind buttons. Press and
hold the button to make the track numbers cycle, release the button
when the desired track is displayed.
3. Press the Play/Pause button to play the selected track.
Select a desired track
1. For track numbers 1-9 simply press the corresponding digit button on
the remote control.
2. For track numbers ten and above press the direct track access but-
ton then press the required digits.
3. If the track number entered exceeds the number of tracks on the CD,
then no track will be played.
3
1,2
1,2
4. To stop play, press the Stop button. The total number of CD tracks
will be displayed.
5. To take out the CD, press and release the CD Eject button. The
display will show "Open".
4
5
2
1,2