Filter
Top Products
16
2
1
4
Cassette deck controls and operations
RECORDING FROM the TV,
VCR or VIDEO
Your system is capable of recording audio from a TV program, VCR tape or
videotape.
1. Insert a cassette into Deck 1.
2. Choose the function - TV, VCR or Video.
3. Choose the TV program or segment of VCR or videotape you
want to record.
4. Press RECORD on the tape deck to ready it and then PAUSE
on the tape deck.
5. Press PLAY to release the tape whenever you are ready to begin
recording.
Erase Protection
When you record new material, the cassette deck records over whatever is on
a tape. To protect a tape from accidental erasure, break off one or both
plastic tabs - one for each tape side - on the top of the cassette tape. If you
decide later to record on the tape, seal the hole with a piece of cellophane
tape.
Quit Slacking
A little bit of slack in your tapes can cause scratches on the tape, or worse
yet, the tape could break. If you notice some slack in the tape, use a pencil
to tighten it up before you insert it.
We’re on the Level
The built-in Automatic Level
Control automatically sets the
input level for optimum
recording sound. You can
listen to and even adjust the
volume setting of the radio
without affecting the quality
of the recording - just don’t
change the station.
A
A
A
A
60
A