Filter
Top Products
12
play
The PLAY button can be activated when the system is in the Normal, Random, Repeat or Stop mode. If in the Normal
mode, the system will attempt to play the next disc in the tray when it has finished all the tracks on the current disc.
When a disc is playing, the display will show the number of the running track, its remaining time and flash the
number of the disc selected for play.
When play is paused, the number of the paused disc will also flash in the display. To resume play, press PLAY.
NOTE: The unit is capable of playing a 3 inch compact disc without the use of adapters or inserts in the Disc 1
position only.
Open/close
The OPEN/CLOSE button can be activated only in the CD function.
Pause
The PAUSE button temporarily suspends CD play. If PAUSE is pressed while the system is in the Play mode, the disc
will continue spin. To start the disc playing from where it was paused, press the PLAY or PAUSE button.
Stop
The STOP button immediately ends disc activity. You may stop a disc when it is in Play or Pause mode.
Track
The TRACK forward and reverse buttons allow you to scroll through the tracks on a disc or a program list and
chose the one you want to hear. If in the Play, Pause or Stop mode and pressed once, it will forward or reverse to the
next track; if held, the track numbers will increment automatically until you let go. If used while the system is in the
Program mode, you can select the tracks to be programmed.
DISPLAY MESSAGES
When the CD player has been activated, the display will show the disc number, the track number, and running time
of the CD in the playing position.
The following is an example of all the messages you will encounter while using your CD player. Specific messages are
explained within the section(s) they pertain.
CD controls and operations
88
88
88
TRACK MIN
SEC
REPEAT
RANDOM
PROGRAM
1
2 3