Filter
Top Products
15
Cassette deck controls and operations
Recording from the Radio
1. Insert a cassette tape into Deck 1.
2. Choose the Tuner function. Press the BAND button to chose a
frequency. Use the TUNING UP (+) or DOWN (-) buttons to
select a station.
3. Press RECORD to ready deck and then PLAY to begin
recording.
4. Press STOP to end recording.
Recording from the CD Player
1. Insert a cassette tape into Deck 1.
2. Choose the CD function.
3. Insert the disc(s) to be recorded. You can start with any track
on a disc or you can create a program to record.
4. When ready to begin taping, press RECORD and then PLAY
on the Tape deck. The system will automatically signal the CD
to simultaneously begin the CD playing and the tape
recording.
Recording from tape to tape
1. Insert the prerecorded tape you want to record into Deck 2.
2. Insert a blank tape into Deck 1.
NOTE: The system will enter Dubbing or High Speed Dubbing
mode only if both tape decks are occupied. However, the system
will not enter either mode if the erase protection cap of the
cassette in Deck 1 has been removed.
3. Press the DUB (dubbing) button.
4. Press only one of the flashing PLAY buttons on either deck to
begin recording.
5. Press STOP at any time to stop recording.
NOTE: Pressing PAUSE will change the DUB function to the normal
recording function.
HIGH SPEED DUBBING
1. Follow steps 1 and 2 from above.
2. Press the HIGH SPEED DUB button.
3. Press only one of the flashing PLAY buttons on either deck to
begin recording at almost twice the normal speed.
4. Press STOP at any time to stop recording.
NOTE: PAUSE will not work during High Speed Dubbing.
DON’T INFRINGE!
This product, used for the purposes
for which it is sold - i.e.,
entertainment, violates no copyright
law. Any attempts to use this
product for that which it was not
intended is unlawful and therefore
not condoned by Thomson
Consumer Electronics.