Filter
Top Products
37
TONE PAGING
You can set the HTX-200 to sound an alert tone when it receives
a transmission that includes the currently set subaudible receive-
tone (or any transmission, if the receive-tone or the tone feature
is set to off). Turn off the radio, then press while you turn the
HTX-200 on again. appears.
The first time the HTX-200 receives a transmission that matches
the current CTCSS settings, it sounds the selected alert tone,
then turns off the tone paging feature. To turn the feature back on,
turn the power off then on again while holding down .
Follow these steps to change the alert tone.
1. Select the VFO mode. (See “Selecting Frequencies (Direct
Tuning)” on Page 23.)
2. Hold down
FUNC
and press (
T.SET
) four times.
MEL
and a
number from
1
to
5
appear. Release
FUNC
.
3. Repeatedly press either or to step through the five dif-
ferent tones. If key tone is enabled, each tone sounds as
you select its number.
4. Press
PTT
to store your selection and exit the menu.
SENDING PAGING TONES
To transmit the selected paging tone, press
while pressing
PTT
.
19-1102RPO.fm Page 37 Friday, June 25, 1999 11:17 AM