Filter
Top Products
22
A QUICK LOOK AT THE DISPLAY
1.
F
: appears when the
FUNC
key is pressed.
2.
TX
: appears when the radio is transmitting.
3.
BUSY
: appears when the radio receives a signal.
4.
CALL
: appears when tone squelch is on and the radio receives a
matching tone.
5. : indicates the battery strength.
6.
S-RF
(Signal/RF Indicator): shows the level of an incoming signal.
When transmitting, shows the relative output signal strength.
7.
BAT
: appears when you turn on the radio — the signal strength
meter then indicates the battery strength.
8. : the stronger the signal, the more boxes appear.
Bars show remaining battery power when
MO
and
PTT
switch are
held down at the same time.
9.
Alpha-Numeric Display
: shows frequency and messages.
10.
Memory Location
: shows the memory channel in use.
11.
MR
(Memory Channel indicator): for use or for programming.
12. : paging tone active.
13. : key tone enabled.
14. : keypad control disabled to prevent accidentally
changing a setting.
15.
PS
: appears when power save is enabled.
16.
TSQ
: appears when Tone Squelch (CTCSS) is enabled.
17.
ã
: appears to indicate a positive repeater offset.
–
indicates a nega-
tive repeater offset.
1
2
3
4
5
6 7 8 9 10 11
121314151617
19-1102RPO.fm Page 22 Friday, June 25, 1999 11:17 AM