Filter
Top Products
33
Setting A Memory Location to Always Skip
During Scanning
The HTX-200 is preset to include all memory locations (except
empty locations) during memory scanning . Follow these steps
to set the transceiver to have it always skip (or resume scanning)
a specific location during scanning.
1. Press
MR
. and the last used memory location
appear.
2. Repeatedly press or to select the desired memory
location.
3. Press
FUNC
+
MR
. The selected memory location and
flash.
4. To set the HTX-200 to skip the memory location, press
SC
,
then press or so
SCSP
ON
(scan skip) appears.
To include the displayed location during scanning, press
or so
SCSP
oF
appears.
5. When you finish, press
SC
again, then press
PTT
to store
the
setting.
MR
MR
19-1102RPO.fm Page 33 Friday, June 25, 1999 11:17 AM