Filter
Top Products
HOW TO CONNECT YOUR BAR
This is really easy too. You likely have many sources for your
audio signal: your TV, your DVD player, or a cable/satellite box.
The bar is able to accept audio from up to three different sources.
The simplest approach is to connect the optical audio output of
your TV to the optical input on the back of the bar. This method
will provide the highest quality audio regardless of whether you
are watching TV or watching your favorite DVD.
If your TV does not have an optical output, you can use the optical
output from your DVD player or your cable/satellite box to connect
t
o the optical input on the bar. Then simply use the other bar
inputs for your other audio sources.
CONNECTING THE BAR AND WIRELESS SUBWOOFER
The SurroundBar 6000 bar and wireless subwoofer come
from the factory preset to work together. If the wireless
subwoofer stops receiving an audio signal, follow these
instructions to re-establish the connection.
1. Turn off the subwoofer’s AC Mains switch.
2. Press and hold the SYNC button on the back
of the bar for three (3) seconds.
3. The LED on the back of the bar will blink,
indicating that the bar and the subwoofer
are ready to be connected.
4. Turn on the subwoofer’s AC Mains switch. When
the subwoofer LED turns solid green the bar
and subwoofer are connected and ready to use.
HOW TO CONNECT YOUR SUBWOOFER
Your subwoofer receives a wireless audio signal from the bar,
so all you need to do is plug in the power cord and make
sure the main power switch is ON.
2.5A
24V
1 32
SOURCE
SYNC
POWER
OFF
ON
60W
OPTICAL AUDIO
OUTPUT
TV or Cable/Sat Box
SurroundBar 6000
Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PMEST polkcs@polkaudio.com 7
Note: If necessary remove
the protective cap prior
to inserting cable.