Filter
Top Products
Controls and displays
04
26
En
Display
Illustration shows the VSX-LX70 display
1
SIGNAL
indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 32).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (
DSDPCM
lights during DSD (Digital Stream
Direct) to PCM conversion with SACDs).
4
S.RTRV
Lights when the Sound Retriever is switched on
(page 68)
.
5
MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 56).
6
FULL BAND
Lights when the Full Band Phase Control is switched on
(page 10).
7
PHASE CONTROL
Lights when the Phase Control or Full Band Phase
Control is switched on (page 10).
8 Sound processing indicators
Light according to the active Audio parameter(s)
(page 68)
and/or ANALOG ATT (page 71)
.
9
V.SB
Lights during Virtual surround back processing
(page 33)
.
10
TUNER
indicators
TUNED – Lights when a broadcast is being received.
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using
the MPX button.
11
SOUND
Lights when any of the Midnight, Loudness or tone
controls feature is selected (page 68).
12 Master volume level
Shows the overall volume level. –80dB indicates the
minimum level, and +12dB indicates the maximum level.
13
SR+
Lights when the SR+ mode is switched on (page 60).
14
STREAM DIRECT
Lights when Direct/Pure Direct is selected (page 31).
15 Speaker indicators
Lights to indicate the current speaker system, A and/or B (page 54).
16 Listening mode indicators
THX – Lights when one of the Home THX modes is
selected.
ADV.SURROUND – Lights when one of the
Advanced Surround modes has been selected.
STEREO – Lights when stereo listening is switched
on (see Listening in stereo on page 31).
STANDARD – Lights when one of the Standard
Surround modes is switched on (see Listening in
surround sound on page 29).
17
SLEEP
Lights when the receiver is in sleep mode (page 71).
18 Matrix decoding format indicators
2 PRO LOGIC IIx – This lights to indicate
2 Pro Logic II / 2 Pro Logic IIx decoding (page 29).
Neo:6 –
When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 29)
.
19 Character display
Displays various system information.
20 Input source indicators
Light to indicate the input source you have selected.
STREAM DIRECT
HDMI
PCM
L C R
SL S SR
SBL SB
LFE
SBR
AUTO
ADV.SURROUND
STANDARD
SLEEP
THX
STEREO
SP
AB
DIGITAL
PRO LOGIC
DIGITAL
WMA9 Pro
SR+
DTS
OVER
AT T
S.RTRV
MONO
dB
DIALOG E
PHASE CONTROL
STEREO
V. S B
TUNED
N
eo
: 6
2
2
ANALOG
FULL BAND
MULTI-ZONE
2
HD
AAC
DSD
PCM
DNR
SOUND
Hi-Bit/Sampling
HMG
VIDEO
TV
DVD
HDMI
DVR
BDP
CD
TUNER
CD-R
PHONO iPod
[ 1 ]
[ 2 ]
[ 3 ]
[ 4 ]
21 3 8765 10 11 12 13
191514 17 2018
4 9
16
04_controls_displays.fm 26 ページ ２００７年７月１８日 水曜日 午前１１時５６分