Filter
Top Products
Connecting your equipment
03
22
En
FM wire antenna
• Connect the FM wire antenna to the FM UNBAL
75
Ω
in the same way as the AM antenna.
For best results, extend the FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
Connecting external antenna to improve FM
reception
Use an F connector to connect an external FM antenna
using a coaxial 75
Ω
cable.
Using the antenna adapter
Use the antenna adaptor to terminate the coaxial cable
used with an external FM antenna.
1 Cut and strip the coaxial cable to the specification
shown in the diagram.
2 Open the adaptor body by pulling apart the tabs on
either side.
3 Insert the cable as shown, then use a pair of pliers
to wrap the end of the wire around the binding post.
Snip off the excess wire.
4 Use pliers to secure the cable by pinching the
clamps together, as shown.
5 Push the body cover back on.
AM
LOOP
ANTENNA
Antenna
adapter
Wire mesh Pull backWire
10 mm to 20 mm5 mm 9 mm
Tabs
VSX_LX60LX70.book 22 ページ ２００７年７月１８日 水曜日 午前１０時１９分