Filter
Top Products
Other Settings
11
69
En
2 Select the ‘
PDP Volume Control
’ setting you want.
• OFF – The receiver does not control the volume of the
plasma display.
• ON – When the receiver is switched to one of the
inputs that use the plasma display (DVD/LD, for
example), the volume on the plasma display is muted
so only sound from the receiver is heard.
3 Assign any input source connected to the plasma
display to the corresponding input number.
This matches the receiver’s input source with a
numbered video input on the plasma display. For
example, assign DVD/LD to input-2 if you have
connected the your DVD video output to video input 2 on
the plasma display.
•The Monitor Out Connect should be set to the input
that you’ve used to connect this receiver to your
plasma display.
4 When you’re finished, press
RETURN
.
You will return to the Other Setup menu.
OSD Adjustment
Use this feature to adjust your TV display if it seems
difficult to see all the instructions on the screen.
1 Select ‘OSD Adjustment’ from the Other Setup
menu.
2Use /// to move the display field around
until you get one that you feel best suits your TV.
3 When you’re finished, press
ENTER
.
You will return to the Other Setup menu.
PDP Volume Control
[ OFF ]
Monitor Out Connect
OFF
8c. SR+ Setup
DVD/LD
-
55.0
dB
:Finish
:Return
a. Multi Ch In Setup
b. ZONE Audio Setup
c. SR+ Setup
d. HDMI Control Setup
e. OSD Adjustment
8. Other Setup
DVD/LD
-
55.0
dB
:Cancel
X=0 , Y=0
[ Finish ]
AA
A
A
VSX_LX60LX70.book Page 69 Wednesday, June 6, 2007 3:13 PM