Filter
Top Products
Controls and displays
04
25
En
Display
1
SIGNAL
indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 31).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (
DSDPCM
lights during DSD (Digital Stream
Direct) to PCM conversion with SACDs).
4
S.RTRV
Lights when the Sound Retriever is switched on
(page 70)
.
5
MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 58).
6
FULL BAND
Lights when the Full Band Phase Control is switched on
(page 10).
7
PHASE CONTROL
Lights when the Phase Control or Full Band Phase
Control is switched on (page 10).
8 Sound processing indicators
Light according to the active Audio parameter(s)
(page 70)
and/or ANALOG ATT (page 73)
.
9
V.SB
Lights during Virtual surround back processing
(page 32)
.
10
TUNER
indicators
TUNED – Lights when a broadcast is being received.
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using
the MPX button.
11
EON
/
RDS
indicators
EON – Lights when the EON mode is set (flashes
during EON reception). The indicator lights when
the current station carries the EON service (page 38).
RDS – Lights when an RDS broadcast is received
(page 37).
12
SOUND
Lights when any of the Midnight, Loudness or tone
controls feature is selected (page 70).
13 Master volume level
Shows the overall volume level. –80dB indicates the
minimum level, and +12dB indicates the maximum level.
14
SR+
Lights when the SR+ mode is switched on (page 62).
15
STREAM DIRECT
Lights when Direct/Pure Direct is selected (page 30).
16 Speaker indicators
Lights to indicate the current speaker system,
A
and/or
B
(page 56).
17 Listening mode indicators
THX – Lights when one of the Home THX modes is
selected.
ADV.SURROUND – Lights when one of the
Advanced Surround modes has been selected.
STEREO – Lights when stereo listening is switched
on (see Listening in stereo on page 30).
STANDARD – Lights when one of the Standard
Surround modes is switched on (see Listening in
surround sound on page 28).
18
SLEEP
Lights when the receiver is in sleep mode (page 73).
19 Matrix decoding format indicators
2 PRO LOGIC IIx – This lights to indicate
2 Pro Logic II / 2 Pro Logic IIx decoding (page 28).
11
STREAM DIRECT
HDMI
PCM
L C R
SL S SR
SBL SB
LFE
SBR
AUTO
ADV.SURROUND
STANDARD
SLEEP
THX
STEREO
SP
AB
DIGITAL
PRO LOGIC
DIGITAL
WMA9 Pro
SR+
DTS
OVER
AT T
S.RTRV
MONO
dB
DIALOG E
PHASE CONTROL
STEREO
V. S B
TUNED
EON
RDS
N
eo
: 6
2
2
ANALOG
FULL BAND
MULTI-ZONE
2
HD
AAC
DSD
PCM
DNR
SOUND
Hi-Bit/Sampling
USB
HMG
VIDEO
TV
DVD
HDMI
DVR
BDP
CD
TUNER
CD-R
PHONO iPod
[ 1 ]
[ 2 ]
[ 3 ]
[ 4 ]
21 3 8765 10 12 13 1
4
201615 18 2119
4 9
17
VSX_LX60LX70.book Page 25 Wednesday, June 6, 2007 3:13 PM