Filter
Top Products
Listening to your system
05
38
En
Listening in stereo
When you select
STEREO
or
DIRECT
, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo.
• While listening to a source, press
STEREO/DIRECT for stereo playback.
Press repeatedly to switch between:
•
STEREO
– The audio is heard with your
surround settings and you can still use
the Midnight, Loudness, and Tone control
functions.
•
DIRECT
– Bypass all effects and surround
settings so that the audio remains as
close to the source audio signal as
possible.
• If you switch on Midnight listening, Loud-
ness, or the Tone controls when
DIRECT
is
selected, the receiver automatically
switches to
STEREO
.
Choosing the input signal
• Default setting:
AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
* Illustration shows the VSX-D814 model
• Press SIGNAL SELECT on the front
panel to select the input signal corre-
sponding to the source component.
Each press cycles through the options as
follows:
•
AUTO
– This automatically switches to
DIGITAL
if a digital source is detected,
otherwise it remains on
ANALOG
.
•
DVD 5.1ch
(VSX-D714/D814 only)
–
Selects the multichannel inputs (only
appears when
DVD/LD
is selected).
•
ANALOG
– Selects the analog inputs.
•
DIGITAL
– Selects the digital input.
When set to
DIGITAL
or
AUTO
,
2
DIGITAL
lights when a Dolby Digital signal is input,
and
DTS
lights when a DTS signal is input.
• This receiver can only play back Dolby
Digital, PCM (32kHz–96 kHz) and DTS
digital signal formats (however, only the
VSX-D714/D814 can decode DTS 96kHz/
24 bit signal formats). With other digital
signal formats, set to
ANALOG
.
• You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 15) and
set the signal input to
DIGITAL
.
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
STEREO/
DIRECT
STANDARD SPEAKERS
S-VIDEODIGITAL IN VIDEO
L AUDIO R
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
LISTENING MODE
TONE
QUICK SETUP
VIDEO INPUT
MULTI JOG
INPUT ATT FL DIMMER
VSX_514-814.fm 38 ページ ２００４年３月２日 火曜日 午後８時３５分