Pioneer VSX-D409 Speaker User Manual


 
7
Introductory Information
Operating range of remote control unit
30
30
23ft (7m)
1
2
3
4
5
6
+
+
-
-
The remote control may not work properly if:
There are obstacles between the remote
control and the receiver's remote sensor.
Direct sunlight or fluorescent light is
shining onto the remote sensor.
The receiver is located near a device that
is emitting infrared rays.
The receiver is operated simultaneously
with another infrared remote control unit.
Preparing the Remote Control
Dry cell batteries
(AA size IEC R6P × 2)
Loading the batteries
Connect to CONTROL IN
terminal of other Pioneer
products with Î mark.
Remote control unit
VSX-D409/
VSX-D509S
CONTROL
OUT
OUT
IN
CONTROL
Other Pioneer products
with Î mark
Operating other Pioneer components
You can also control Pioneer components
by pointing the receiver's remote control
directly at the component. This type of
operation does not require control cords.
By connecting a control cord (optional), you can
control other Pioneer equipment using this remote
control unit. Point the remote control unit towards
the remote sensor of this unit, even when operating
other equipment.
The remote control signals are received by the
remote sensor of this unit, and sent to the other
devices via the CONTROL OUT terminal.
CAUTION!
Incorrect use of batteries may result in such
hazards as leakage and bursting. Observe the
following precautions:
Never use new and old batteries together.
Insert the plus and minus sides of the
batteries properly according to the marks
in the battery case.
Batteries with the same shape may have
different voltages. Do not use different
batteries together.
memo
memo
VSX-D409
VSX-D509S
Set up
Dry cell batteries
(AA size IEC LR6 × 2)