Pioneer VSX-D409 Speaker User Manual


 
33
Operation
Displays & Controls
4 THE FOLLOWING FOUR SETS OF
BUTTONS ARE DEDICATED TV
CONTROL. THEY ARE ONLY USED
FOR CONTROLLING YOUR TV.
TV VOLUME +/– buttons
Use to adjust the volume on your TV.
TV button
Use to turn on the power of the TV.
TV FUNC button
Use select the TV function.
MENU button
Use to access different menus associated with
your Satellite TV, cable TV, etc.
5 CHANNEL +/– buttons
Use to adjust the volume on your TV.
6 2 3 5∞ ( FQ +/–) & ENTER buttons
(see pages 16-21, 42)
Use these arrow buttons when setting up your
surround sound system (see pages 16-21).
These buttons are also used to control DVD
menus/options. The FQ +/– buttons can be used
to find radio frequencies.
7 8 button
Use to pause other components.
8 1 button (BAND)
Use to fast reverse search on CDs etc.
Use to switch between the AM and FM band
when in TUNER mode.
9 3 button (DIRECT ACCESS)
Use to play other components. Also use to
directly access a radio station by pressing the
number of the station you want.
0 7 button (MPX)
Use to stop other components. Also use to
switch between auto stereo and mono reception
of FM broadcasts. If the signal is weak then
switching to MONO will improve the sound
quality.
- 2 button
Use to put receiver in DOLBY DIGITAL, DOLBY
SURROUND and DTS modes. To use first press
the RECEIVER button then operate this button.
= DSP button
Use to put receiver in one of the DSP modes. To
use first press the RECEIVER button then operate
this button.
~ CHANNEL SELECT
Use to select a speaker when setting up the
surround sound of the receiver. To use first press
the RECEIVER button then operate this button.
! LOUDNESS button
Use to switch on the loudness. This feature is
useful for getting good bass and treble sounds
listening at low volumes.
@ FUNCTION button
Use to select the playback or recording source.
This button lets you cycle through the different
functions of the receiver in the following order:
CD, tuner, AUX, CD-R/TAPE/MD, VCR/DVR,
DVD/LD, VIDEO and TV/SAT.
# CHANNEL LEVEL +/– buttons
Use to adjust the output level of the selected
channel(s).
$ LED DISPLAY
This display flashes when a command is sent
from the remote control to the receiver. It also
flashes at other times, for example when
teaching the receiver preset codes, with specific
meanings.
% RECEIVER button (see page 16)
This switches between STANDBY mode and
power ON for this receiver.
^ ENTER button (DISC)
Use for controlling other components only.
& MASTER VOLUME +/– buttons
Use to set the overall listening volume.
* button
Use to record with other components.
( ¡ button (CLASS)
Use to fast forward search on CDs etc. Also use
the CLASS feature to switch between the three
banks (classes) of station memories.
) ¢ button (DTV MENU)
Use to skip forward tracks on CD players etc.
Also use to access DTV menus.
_ 4 button (DTV ON/OFF)
Use to skip reverse tracks on CD players etc.
Also use to turn DTV on/off.
+ TEST TONE
Use to sound the TEST TONE when setting up
the surround sound of the receiver. To use first
press the RECEIVER button then operate this
button.
¡ FL DIMMER button
Use this button to make the fluorescent display
(FL) dimmer or brighter. There are three
brightness settings as well as an off setting.
SETUP button (see p.27, 29)
Use this button when setting up the remote
control to control other components.
£ MUTING button
Use to mute the sound or restore the sound if it
has been muted.