Pioneer VSX-D409 Speaker User Manual


 
37
Operation
Switching ANALOG/DIGITAL Signal Input
When you select a function (for example, CD) that is only hooked up by a digital connection, then the
ANALOG/DIGITAL signal input switch will automatically choose digital. If you have that function hooked
up by both digital and analog connections this switch lets you choose which tolisten to.
1
Press RCV.
This switches the remote to the surround setup mode. (On the
VSX-D409 the button is called RECEIVER.)
2
Press SIGNAL SELECT to select the input
signal corresponding to the source
component.
Each press switches between ANALOG and DIGITAL signal
selection.
3
While SIGNAL SELECT is set to DIGITAL, 2
DIGITAL lights when a Dolby Digital signal is
input, DTS lights when a DTS signal is input.
SIGNAL SELECT is fixed in the “ANALOG” position for components
not assigned to one of the two digital input jacks.
This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz,
and 48kHz), DTS, digital signal formats. With digital signal formats
other than these, set SIGNAL SELECT to “ANALOG”.
When an LD or CD player compatible with DTS is played back with
SIGNAL SELECT set in “ANALOG”, digital noise is output caused by
playing back the DTS directly (no decoding). To prevent noise, you
need to make digital connections (Refer to page 11) and set SIGNAL
SELECT to “DIGITAL”.
Some DVD players don’t output DTS signals. For more details, refer
to the instruction manual supplied with your DVD player.
Sound Modes
memo
SIGNAL SELECT
SIGNAL
SELECT
ANALOG
SIGNAL
SELECT
ANALOG
DIGITAL
SIGNAL
SELECT
ANALOG
DIGITAL
2DIGITAL
SIGNAL
SELECT
ANALOG
DIGITAL
DTS
Each press switches between ANALOG
and DIGITAL signal selection.
When a Dolby Digital
signal is input.
When a DTS
signal is input.
1
SOURCE
ENTER
MIDNIGHT
SIGNAL SELECT
TV CONTROL
TV
EFFECT
DISC+10
5.1CH
MULTI CONTROL
ATT
DVD TV VCR CD-R
RCV CD TUN TVC
RECEIVER
123
456
789
0
MULTI CONTROL
DVD/LD TV/SAT VCR/DVR CD
AT T
CH
2
DSP MODE
MIDNIGHT
5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL
EFFECT
ENTER
FUNC
10 DISC
SIGNAL
SELECT
TEST
TONE
RECEIVER
TUNER
TV CONT
Î
1234
5678
90
1
2
2